Asian Pear Tree Grafted
$ 90.20
- Asian Pear Tree Grafted in a 3 Gallon Container. Cold Hardy Tree, Asian pears (sometimes referred to as "apple pears") are extremely juicy and crisp. Great for eating right off the tree, as well as a great addition to salads. These fruit are usually found in markets and are usually expensive. Great addition to any garden. Introduction Pollination Bloom Period Winter Hardiness Trainig And Pruning Diseases And Pests Fruit Thinning Harvest And Maturity Cultivars Introduction Asian pears comprise a large group of pears that are crisp in texture and, when mature, are good to eat as soon as harvested or for several months after picking if held in cold storage. This ready-to-eat feature may make them more acceptable to some people than European pears that are usually served when soft and juicy, which condition takes about a week to occur after removal from cold storage. Asian pears do not change texture after picking or storage as do European pears such as 'Bartlett' or 'Comice'. Often Asian pears are called apple pears because they are crisp and juicy like apples but with a different and distinctive texture. They also are called salad pears, Nashi (Japanese for "pear"), Oriental, Chinese or Japanese pears (Nihonnashi). All Asian pears today are selected seedlings or crosses made within Pyrus serotina. Asian pears have been grown commercially in Asia for centuries. In Japan about 500,000 tonnes are grown and some fruit is exported to the United States in October and November. China and Korea also grow these pears for domestic consumption and export to the United States and Canada.. Pollination Asian pear cultivars are partially self-fruitful but better crops are set where two or more cultivars are planted together. In Fresno and Tulare counties, '20th Century' or 'Shinseiki' are known to set good crops when planted alone in large blocks. In areas with cooler temperatures at bloom-time, cross-pollination by European or Asian pear cultivars will be necessary. Cross-pollinated fruit with seed tend to be larger and more uniformly, round than fruit with few seeds due to inadequate pollination. No proven guidelines exist on the closeness of pollinizers or the use of bees for Asian pears in California. It is suggested that every 4 to 8 rows of a single cultivar have a pollinizer row or that growers plant a block of 4 to 8 rows of a second cultivar adjacent to the first. Bees may be used at a density of one to two hives per acre. Early-blooming cultivars 'Ya Li', 'Tsu Li' and 'Seuri' are compatible and should be planted together. Most of the Japanese and hybrid cultivars and selections are late blooming. Notably 'Niitaka' is pollen-sterile; 'Kikusui' does not pollinate '20th Century'; 'Seigyoku' and 'Ishiiwase' are poor pollinizers. Most other cultivars pollinate each other. Too much pollination means more thinning of fruit is necessary for proper fruit sizing. Bloom Period The early blooming Chinese cultivars 'Ya Li', 'Tsu Li' and 'Seuri' bloom 10 to 14 days before 'Bartlett'. In the San Joaquin and Sacramento Valleys of California, these early blooming cultivars are in full bloom by early to mid-March. They are the first pears to bloom and are most subject to frost damage. The earliest flowering Japanese cultivar is 'Chojuro' which flowers at the same time as 'Anjou' or 'Winter Nelis'. Late-flowering Japanese cultivars are '20th Century' and 'Okusankichi' which reach full bloom with 'Bartlett'. Most years the last third or half of 'Chojuro' bloom overlaps the first third or half of '20th Century bloom. Japanese and Chinese hybrids 'Shin Li' and 'Dasui' developed at the University of California bloom late in the Japanese flowering season. Thus, most Japanese pears overlap adequately to pollinate each other. The early Chinese types overlap each other but rarely overlap Japanese or European pear cultivars enough for good pollination in California. In Washington State early flowering 'D'Anjou' is well pollinated by '20th Century' and other Asian pears. Winter Hardiness Asian pear trees like '20th Century' are about as winter hardy as 'Bosc', tolerating about -20°F, but are less hardy than 'Bartlett' and 'Anjou'. Asian pear rootstocks' tolerances for winter cold are 10°F for P. calleryana, 0° to -10°F for P. betulaefolia and -40°F for P. communis and P. serotina. Training And Pruning Normally, Asian pears are trained vase-shape in California. This is generally accomplished by heading nursery trees about 25 to 30 inches high at time of planting and selecting 3 or 4 main limbs the first year and heading these new limbs about 50% leaving 12 to 24 inches of growth depending on the length of the growth the first year. This will give 6 to fairly low secondary limbs that are headed 30 to 36 inches long in the second dormant season. After fruit production starts (the third season), limbs are allowed to elongate about 18 inches per year and then they are headed to the dormant season. If trees are growing excessively then pruning should be reduced to encourage fruit spur development. All fruit are borne on spurs on 2- to 6-year-old wood. Older wood and spurs give smaller fruit than those on 2- to 4-year-old wood. Clean pruning cuts and excess spurs should be cut off smoothly so stubs will not rub and damage fruit. Fruit sizes best on 1- to 3-year-old spurs on wood 1 to 2 inches in diameter. Fruit on small hanger wood sizes poorly Pruning should encourage several limbs with wide angle branches off main scaffold limbs. Some limb spreading to open tree centers may be desirable. In many pear areas outside California, Asian pear trees are grown as central leaders similar to apple tree training. This is done with little or no heading of the tree and selecting wide angle limbs for framework limbs off the central leader. The final tree looks like a Christmas tree in shape. It is advisable to maintain individual tree spacing and avoid tight hedgerows for good fruit color and long-lived, productive orchards. In New Zealand, most 'Nashi' trees are central-leader-trained. In Japan, a flat-topped training system called "tanashitate" is used and trees are supported by cables and wire suspended from tag poles. This system is preferred for wind protection and to facilitate all the hand labor performed in Japanese pear production. Diseases And Pests All Asian pear cultivars except 'Shinko' may develop fireblight (Erwinia amylovora). In areas with cold spring seasons, Asian pears will get bacterial canker (Pseudomonas spp.). When trees are planted too deep in the soil they may die of crown rot (Phytophthora spp.). Asian pears are as susceptible to fireblight as most European pears. Experienced growers usually spray antibiotic fireblight materials (Streptomycin, Terramycin, or copper) during the bloom period and later in the spring when conditions for fireblight infections are favorable, namely when average daily temperatures exceed 60deg.F and rain or dew occurs on the flowers. Antibiotic sprays for fireblight should be made at time of bloom and continued in April and May and after harvest. Frequent removal of diseased (blighted) limbs to control fireblight is necessary most years. In Japan, black spot (Alternaria kikuchiana) is extremely damaging to fruit requiring bagging to protect certain yellow-skinned cultivars but black spot disease is not known to exist in the United States. Also, scab is a problem in Japan, but it is not the same scab species found in California on 'Bartlett' pears and apples. Codling moth (Carpocapsa pomonella) is severe on Asian pears, requiring 3 to 4 well-timed sprays of the same insecticides used on apples and European pears at or near full dosage for control of this serious pest. Thinning clusters to single fruit also reduces codling moth infestation on fruit. Pear psylla (Psylla pyricola) can cause sticky fruit and requires at least one delayed dormant spray Many types of stink bugs and plant bugs cause injury as hard, tan-colored spots under the flesh of Asian pears. Two-spot spider mites are serious on Asian pear trees especially if the trees become water-stressed. Mite spray before harvest and frequent irrigation is essential for control of two-spot and European red mites. Fruit Thinning All Asian pear cultivars require heavy thinning to obtain good fruit sizes, to insure annual cropping, and to avoid limb breakage. All thinning is done by hand since chemical thinning is not safe or reasonably effective. Some growers blossom-thin, by cutting off by hand all but 2 to 3 flowers per cluster. Most growers wait for fruit to set and then cut off all but 1 or 2 fruits per spur. This first fruit thinning is best done before the first codling moth spray and can be done by cutting off the fruit with clippers or small hand shears. A second follow-up thinning before the second codling moth spray is necessary on hard-to-size cultivars and to remove pears not properly thinned the first time. The best thinning usually requires two times to effectively leave no more than one fruit per spur, and if spurs are close together well thinned fruit are spaced four to six inches apart. Thinning up to 30 days before harvest can benefit size, but early thinning is essential for annual bearing and good fruit sizes. Thinning will require up to a half-hour per tree on younger trees and one hour plus on older trees. Trees four to five years old size fruit easily if they have only 100 to 200 per tree after thinning is finished. Crop loads of 200 to 400 fruit per tree are common on 8- to 10-year-old trees. In Japan, 500 to 700 fruit are recommended on large bearing trees or 70,000 fruit per acre. Harvest And Maturity Harvest season in California is from mid-July through September with a few earlier or later cultivars. In Washington State and Japan, fruit are harvested August, September, and October. Most growers determine harvest time by fruit taste and color. Sugar content over 12.5% usually is adequate and fruit pressure of 8 to 11 pounds seems satisfactory. Fruit pressure is not as good a measure of maturity in Asian pears as it is in European pears. The color of russet-type fruit changes from green to brown, and the ground color of green fruit changes from green to yellow. Color and sugar content best determine time to harvest. Some green Chinese and hybrid types do not change color much at maturity. All Asian pears must be carefully handled to minimize bruising and brown marks and stem punctures. Over-mature fruit quickly show roller bruises, fingerprints and other signs of handling at harvest. Under-mature fruit are poor in flavor and ruin the market for Asian pears. At least three color picks are necessary to get mature, quality fruit from most cultivars in the central valley of California. All Asian pear cultivars should be harvested carefully into padded picking buckets or boxes and handled gently in the packinghouse. They have tender skin that bruises, discolors and blackens a day after rough handling during picking and handling. Rough handling during picking can cause stem punctures. Many growers believe Asian pears are harder to handle than firm peaches and believe they are not suited to large, fast-moving packinghouse lines. Fruit is best field-packed from picking containers to packing boxes or trays. In the packinghouse, placement of fruit on wide, slow-moving, smooth, clean belts will distribute fruit to packers who "eye-size" fruit and place them into plastic pack trays used to hold fruit in containers going to market. Fruit should be padded into boxes with "bubble pads" or paper-covered excelsior pads to prevent rolling while in transit. Fruit are packed either two layers deep in 21- to 24-pound "L.A." lugs with pads and plastic packing m olds or packed one layer deep in "cherry" lugs. Fancy large fruit (12, 15, 16, 18 and 21 sizes-3- to 4-inch diameter) are packed in single-layer 11 to 12 pounds of fruit in "cherry" boxes. Medium-sized fruit are packed in two-layer boxes as sizes 48 or 50 (3-inch diameter), 54 or 56 (2-7/8 inch diameter), and 60-64 (2-5/8 inch diameter, with fruit weight of 21 to 24 pounds. Imported Japanese fruit are packed in 20-kilo cartons similar to tray-pack apples and are 3-1/2 to 4 inch diameter. Fruit of some cultivars can be stored at 32°F for one to three months without problems. After 2-1/2 months 'Hosui' and 'Shinko' fruit gets spongy, shows some storage rot and after four months may show internal breakdown in the core area. Less mature fruit get spongy sooner than fully mature fruit. At room temperature of 70°F, the fruit begins to soften or get spongy after 14 to 21 days. Storage problems include shrivel of skin, spongy fruit, internal browning of core and skin blackening. Benefits of controlled atmosphere storage of Asian pears are unknown. Decay can occur where skin is cut and fruit stored over 60 days. Cultivars Asian pear cultivars are numerous with over 25 known in California and hundreds of cultivars known in the Orient. Selection of the better cultivars for planting and future sales is a problem for all involved with this crop. The more important cultivars available in California are discussed with some ripe dates indicated for Davis, California. In Fresno, ripening will be 7 days earlier; in Oregon and Washington, about 21 to 30 days later. There are 3 types of Asian pears. They are (1) round or flat fruit with green-to-yellow skin, (2) round or flat fruit with bronze-colored skin and a light bronze-russet (3) pear-shaped fruit with green or russet skin. Varieties are listed in order of ripening. 'Ichiban Nashi': An early-maturing, large, brown fruit ripening in mid-July ahead of 'Shinseiki', 'Shinsui' and 'Kosui.' 'Shinsui': An early-maturing, brown fruit with reasonable size, ripening in mid-July after 'Ichiban Nashi' and before 'Shinseiki'. 'Kosui': A small, flat bronze-russet early-maturing, sweet fruit with a tender skin that ripens in mid-July. A strong-growing tree with leaves sensitive to 2-spot spider mites and many sprays. 'Shinseiki': A round, yellow-skinned, firm fruit that is early-maturing (late July) plus it stores well up to three months. In appearance it resembles '20th Century' but is less flavorful. Trees are self-fruitful in the San Joaquin Valley. They require no pollinators. Fruit holds on the tree well and is often color-picked four times per season. Heavy thinning is necessary for good fruit size. 'Hosui': A very large, juicy, sweet, low acid, bronze-skinned pear that ripens in early August. The tree is extremely vigorous on P. betulaefolia and has a wild, loose growth habit. This is a very popular new cultivar in Japan and California. It gives good consumer and grower satisfaction. It is usually very susceptible to fireblight and stores for four to six weeks. 'Kikusui': A flat, yellow-green, medium-sized fruit with excellent flavor but a reputation for having, tender skin. The fruit stores well until February but the dull-colored skin makes it less attractive at harvest than '20th Century'. The fruit sizes better and has flavor and texture equal to '20th Century'. It ripens in mid-August but fruit has preharvest drop problems. Tree has average vigor. 'Yoinashi': A large, brown-skinned fruit with excellent flavor. It ripens in mid-August with '20th Century' but sizes much better. '20th Century' ('Nijisseki'): This is the best flavored and most popular Asian pear in Japan and California. It originated in Japan in about 1900 and was responsible for the high popularity of pears in Japan. It is round, yellow-skinned, easily bruised, but stores well up to six months. The fruit is more difficult to size than other cultivars but its popularity outweighs this problem. It should not be grown on P. communis rootstock because it is severely dwarfed. The fruit ripens in mid-August. It grows well on P. betulaefolia, P. calleryana, and P. serotina. Old trees need spur removal and rejuvenating pruning to maintain fruit size. The tree is naturally well shaped and easy to handle. 'Chojuro': An old, firm, brown- to orange-skinned, flat-shaped, highly productive cultivar is losing popularity because it is not as juicy as many newer ones. It matures in mid-August, bruises easily but stores for five months. It must be picked when first yellow-brown in color or fruit is subject to severe bruising and skin discoloration. 'Shinko': The fruit is large and round to slightly flattened with a beautiful bronze-russet skin. Fruit flavor is excellent in hot climates but the fruit stores only about two months. The tree is well shaped and extremely productive, an annual bearer despite heavy crops. It matures during the first week of September and appears to be nearly resistant to fireblight. 'Niitaka': A very large, firm, brown-russet fruit. It is noted for its large size, average flavor and high production. The tree is dwarfed severely on P. communis and vigorous on P. betulaefolia. Fruit ripens in early September and stores two months. The flowers are pollen-sterile but it sets well when cross-pollinated with most varieties. 'Ya Li': A popular Chinese cultivar, is pear-shaped, has green skin and is quite tender to bruising. It is early blooming and requires cross-pollination by other early flowering cultivars such as 'Tsu Li' and 'Seuri'. The flavor is sweet and milder than other cultivars. When properly thinned and pollinated it sizes to 10 to 12 ounces. It is the most important pear cultivar in China. It stores well until February and keeps its green color. Trees are very productive and vigorous on all pear rootstocks. It ripens late in August and early September. This cultivar is slower to come into production than most Japanese cultivars. 'Tsu Li': A large, football-shaped, green fruit of only fair quality. It has long storage life (six to ten months) and gets better the longer it is stored. The fruit ripens in early to mid-September and develops a greasy feel on the skin. It must be pollinated by 'Ya Li'. 'Tsu Li' in California and 'Tsu Li' in China are not the same cultivar. 'Dasui Li' and 'Shin Li': New U.C. hybrids, very large fruit, greenish to yellow in color. They ripen in late September and early October and store well at 32°F for six months. Trees are extremely vigorous and pollinate each other. For good crops, limited pruning is essential in the second and third seasons to slow growth and encourage spur and fruit production. They grow well on P. betulaefolia or P. communis roots. 'Okusankichi': This is an old Korean and Japanese cultivar that ripens in October and stores well. The fruit is brown-russet, somewhat elongated and slightly irregular in shape. At harvest it has only fair flavor, but flavor improves in storage.
- Brand
- Need this Tool Customized?
Brand
LMT
Need This Tool Customized?
Every machining application is different. If this tool is close to what you need but not an exact fit, General Cutting Tools can help modify it for your specific job, machine, material, or production requirement.
We work with CNC shops, industrial manufacturers, tool rooms, and production facilities to provide tool modifications that improve fit, function, performance, and efficiency. Whether you need a small adjustment or a more specialized cutting tool solution, our team can review your requirements and recommend the best option.
Custom tool modifications can help reduce setup time, improve accuracy, extend tool life, solve clearance issues, and support more consistent production results.
Common Tool Customization Options
Diameter and OD Modifications
We can modify tool diameters to better match your application requirements, including cutting diameter changes, OD modifications, pilot diameter adjustments, step diameters, and shank diameter modifications.
Bore Modifications for Saw Blades
Custom saw blade bore modifications are available for hole diameter changes, pinholes, mounting holes, and keyway cutouts to help match your machine setup and cutting requirements.
Length Adjustments
Tools can be modified for specific reach, clearance, or setup needs. This may include overall length changes, flute length adjustments, reduced neck sections, extended reach designs, or shortened tools for improved rigidity.
Shank Modifications
Shank modifications can help ensure the tool fits properly in your holder, spindle, or machine setup. Common options include shank diameter changes, flats, Weldon flats, reduced shanks, and custom holding requirements.
Radius, Chamfer, and Corner Changes
We can customize corner radius, chamfer angles, edge breaks, and other profile details to meet part print requirements or improve cutting performance.
Step Tool Modifications
For applications that require multiple diameters or operations in a single tool, we can create or modify step tools to help reduce tool changes and improve production efficiency.
Flute and Cutting Edge Adjustments
Depending on the tool and application, flute length, cutting edge geometry, end cutting features, relief angles, and cutting edge shape may be modified to improve chip evacuation, cutting action, and tool performance.
Regrinding and Resharpening
Many cutting tools can be reground or resharpened to restore performance, extend tool life, and reduce replacement costs.
Custom Profiles and Special Forms
For unique part features, we can help provide special forms, custom profiles, custom radii, counterbores, countersinks, keyseat cutters, form tools, and other application-specific tooling solutions.
Material-Specific Tool Adjustments
We can help modify or recommend tooling based on the material being machined, including aluminum, brass, bronze, plastics, stainless steel, hardened steel, cast iron, composites, and other industrial materials.
Have a Drawing, Sample, or Part Print?
Send us your print, sketch, CAD file, photo, tool number, sample, or application details. For the fastest quote, include the material being cut, quantity needed, required dimensions, tolerances, and any machine or holder requirements.
Coating Options
Tool coatings can be selected or added to improve wear resistance, heat resistance, lubricity, and performance in specific materials such as steel, stainless steel, aluminum, cast iron, and high-temperature alloys.
Request a Custom Tool Modification
Need this tool changed for your application? Contact General Cutting Tools today to discuss your custom tooling needs. We can help you find the right solution for your machine, material, and production goals.
Related products
Adjustable Milling System
$ 5.68
Adjustable Milling System
$ 2.43
Adjustable Milling System
$ 2.60
Adjustable Milling System
$ 4.04
Adjustable Milling System
$ 4.24
Adjustable Milling System
$ 3.28
Adjustable Milling System
$ 5.68
Adjustable Milling System
$ 3.14