Thomas Elliott Sulphate of Ammonia 21-0-0 25Kg
$ 41.71
- Description Thomas Elliott Potato Fertiliser Contains: 21% Nitrogen, 0% Phosphate, 0% Potassium Pack Size – 25Kgs NPK: 21:0:0 Our Ammonium Sulphate Fertiliser is an ideal solution to Nitrogen deficiencies within the soil, or to fertilise high alkalinity soils. This allows a more diverse selection of plants to be grown in an area. This is highly beneficial to leafy green plants as well boosting early growth, and providing them with a supply of Sulphur for later growth. Suggested Usage Rates: For Lawns: The suggested application rate is 35g/sqm for usage on lawns, as grasses are quite sensitive to pH levels in the soil. However they do still benefit from the nutrients in this fertiliser. Water your lawn or field thoroughly after application in order to maximise effectiveness. For Vegetables: Apply 35g/sqm as a top dressing to the soil surface and fork it in well. Trees, Shrubs and Flowers: Use 35g/sqm around established plants, whilst gently forking the fertiliser into the soil. Take care not to disturb the roots of the plant. Ensure that the fertiliser does not directly touch the stem or leaves to avoid “scorching”. After application water well. We recommend checking the pH levels and Nitrogen/Sulphur levels within the soil before use. Avoid increasing acidity of the soil too much or over exposing plants to these minerals. This fertiliser can “scorch” plants if applied directly onto them. It is common to be fork it into the soil around the plants, or mixed with water and sprayed over them as a diluted solution to minimise this. Mineral Analysis: Nitrogen 21%: Nitrogen is key to the growth of leafy, green plants. It is a part of the chlorophyll, which make the leaves and stem green and allows photosynthesis to occur. Identify deficiencies of Nitrogen via pale green or yellow leaves due to a lack of chlorophyll. As these symptoms are similar to Sulphur deficiencies you can differentiate them by looking for a red colour along the veins on the leaves which shows that they are nitrogen deficient. Sulphate of Ammonia is a quick acting, nitrogen fertiliser which encourages leafy growth. It is especially beneficial for crops such as brassicas, lettuce, spinach, rhubarb, leeks and onions. Sulphate of Ammonia: Provides a rapid boost to flowering plants, shrubs and fruits Can also green up a tired lawn Promotes above the ground growth and rich green foliage. A traditional fertiliser, Sulphate of Ammonia should be applied evenly at the recommended rate and hoed into the top surface of the soil. If the soil is dry, it should be well watered in. Sulphate of Ammonia should not be left on leaves or stems, it should be lightly brushed off onto the surrounding growing media. If using to brighten tired lawns, Sulphate of Ammonia can be sprinkled on the surface and wetted in. Alternatively it can be diluted and used as a liquid feed, which can be re-applied at monthly intervals between April and September. Additional information Weight 25 kg Active Ingredient 21% Nitrogen 0% Phosphate 0% Potassium Pack Size 25kg Pack Size Coverage Up to 714m² Spreading Rate 35-70g per m2 Application Method(s) Spread by Hand, Spreader Area of Use Lawns, Turf, Crops, Plants
- Brand
- Need this Tool Customized?
Brand
LMT
Need This Tool Customized?
Every machining application is different. If this tool is close to what you need but not an exact fit, General Cutting Tools can help modify it for your specific job, machine, material, or production requirement.
We work with CNC shops, industrial manufacturers, tool rooms, and production facilities to provide tool modifications that improve fit, function, performance, and efficiency. Whether you need a small adjustment or a more specialized cutting tool solution, our team can review your requirements and recommend the best option.
Custom tool modifications can help reduce setup time, improve accuracy, extend tool life, solve clearance issues, and support more consistent production results.
Common Tool Customization Options
Diameter and OD Modifications
We can modify tool diameters to better match your application requirements, including cutting diameter changes, OD modifications, pilot diameter adjustments, step diameters, and shank diameter modifications.
Bore Modifications for Saw Blades
Custom saw blade bore modifications are available for hole diameter changes, pinholes, mounting holes, and keyway cutouts to help match your machine setup and cutting requirements.
Length Adjustments
Tools can be modified for specific reach, clearance, or setup needs. This may include overall length changes, flute length adjustments, reduced neck sections, extended reach designs, or shortened tools for improved rigidity.
Shank Modifications
Shank modifications can help ensure the tool fits properly in your holder, spindle, or machine setup. Common options include shank diameter changes, flats, Weldon flats, reduced shanks, and custom holding requirements.
Radius, Chamfer, and Corner Changes
We can customize corner radius, chamfer angles, edge breaks, and other profile details to meet part print requirements or improve cutting performance.
Step Tool Modifications
For applications that require multiple diameters or operations in a single tool, we can create or modify step tools to help reduce tool changes and improve production efficiency.
Flute and Cutting Edge Adjustments
Depending on the tool and application, flute length, cutting edge geometry, end cutting features, relief angles, and cutting edge shape may be modified to improve chip evacuation, cutting action, and tool performance.
Regrinding and Resharpening
Many cutting tools can be reground or resharpened to restore performance, extend tool life, and reduce replacement costs.
Custom Profiles and Special Forms
For unique part features, we can help provide special forms, custom profiles, custom radii, counterbores, countersinks, keyseat cutters, form tools, and other application-specific tooling solutions.
Material-Specific Tool Adjustments
We can help modify or recommend tooling based on the material being machined, including aluminum, brass, bronze, plastics, stainless steel, hardened steel, cast iron, composites, and other industrial materials.
Have a Drawing, Sample, or Part Print?
Send us your print, sketch, CAD file, photo, tool number, sample, or application details. For the fastest quote, include the material being cut, quantity needed, required dimensions, tolerances, and any machine or holder requirements.
Coating Options
Tool coatings can be selected or added to improve wear resistance, heat resistance, lubricity, and performance in specific materials such as steel, stainless steel, aluminum, cast iron, and high-temperature alloys.
Request a Custom Tool Modification
Need this tool changed for your application? Contact General Cutting Tools today to discuss your custom tooling needs. We can help you find the right solution for your machine, material, and production goals.
Related products
Adjustable Milling System
$ 8.42
Adjustable Milling System
$ 3.28
Adjustable Milling System
$ 10.66
Adjustable Milling System
$ 8.61
Adjustable Milling System
$ 4.10
Adjustable Milling System
$ 4.24
Adjustable Milling System
$ 2.95
Adjustable Milling System
$ 5.68