Caimito/Star Apple Tree Green Variety
$ 96.79
- Common name: Caimito, Star Apple Botanical name: Chrysophyllum cainito Avg Height X Width: 25' X 25' Family: Sapotaceae Origin: West Indies Season: February-May Damage temp: 28-30 F Caimito/Star Apple Tree Green Variety Grafted in a 3 Gallon Container. This beautiful shade tree has glossy dark green leaves with a silky bronze color underneath. Caimito is a favorite in the Caribbean and Central America as well as Southeast Asia. The fruit has a mild grape-like flavor, and is best eaten fresh. Description Origin and Distribution Varieties Climate Soil Propagation Culture Harvesting Yield Keeping Quality Pests and Diseases Food Uses Food Value Toxicity Other Uses Medicinal Uses One of the relatively minor fruits of the family Sapotaceae, the star apple or goldenleaf tree, Chrysophyllum cainito L. (syn. Achras caimito Ruiz & Pavon), has acquired a moderate assortment of regional names. In Spanish, it is usually caimito or estrella; in Portuguese, cainito or ajara; in French, generally, caimite or caimitier; in Haiti, pied caimite or caimitier a feuilles d'or; in the French West Indies, pomme surette, or buis; in the Virgin Islands, cainit; in Trinidad and Tobago, it is caimite or kaimit; in Barbados, star-plum; in Colombia, it may be caimo, caimo morado (purple variety) or caimito maduraverde (green variety); in Bolivia, caimitero, or murucuja; in Surinam, sterappel, apra or goudblad boom; in French Guiana, macoucou; in Belize, damsel; in El Salvador, guayabillo; in Argentina, aguay or olivoa. The Chinese in Singapore call it "chicle durian". Description The star apple tree is erect, 25 to 100 ft (8-30 m) tall, with a short trunk to 3 ft (1 m) thick, and a dense, broad crown, brown-hairy branchlets, and white, gummy latex. The alternate, nearly evergreen, leaves are elliptic or oblong-elliptic, 2 to 6 in (5-15 cm) long, slightly leathery, rich green and glossy on the upper surface, coated with silky, golden-brown pubescence beneath when mature, though silvery when young. Small, inconspicuous flowers, clustered in the leaf axils, are greenish-yellow, yellow, or purplish-white with tubular, 5-lobed corolla and 5 or 6 sepals. The fruit, round, oblate, ellipsoid or somewhat pear-shaped, 2 to 4 in (5-10 cm) in diameter, may be red-purple, dark-purple, or pale-green. It feels in the hand like a rubber ball. The glossy, smooth, thin, leathery skin adheres tightly to the inner rind which, in purple fruits, is dark-purple and 1/4 to 1/2 in (6-12.5 mm) thick; in green fruits, white and 1/8 to 3/16 in.(3-5 mm) thick. Both have soft, white, milky, sweet pulp surrounding the 6 to 11 gelatinous, somewhat rubbery, seed cells in the center which, when cut through transversely, are seen to radiate from the central core like an asterisk or many-pointed star, giving the fruit its common English name. The fruit may have up to 10 flattened, nearly oval, pointed, hard seeds, 3/4 in (2 cm.) long, nearly 1/2 in (1.25 cm) wide, and up to 1/4 in (6 mm) thick, but usually several of the cells are not occupied and the best fruits have as few as 3 seeds. They appear black at first, with a light area on the ventral side, but they dry to a light-brown. Origin and Distribution It is commonly stated that the star apple is indigenous to Central America but the eminent botanists Paul Standley and Louis Williams have declared that it is not native to that area, no Nahuatl name has been found, and the tree may properly belong to the West Indies. However, it is more or less naturalized at low and medium altitudes from southern Mexico to Panama, is especially abundant on the Pacific side of Guatemala, and frequently cultivated as far south as northern Argentina and Peru. It was recorded by Ciezo de Leon as growing in Peru during his travels between 1532 and 1550. It is common throughout most of the Caribbean Islands and in Bermuda. In Haiti, the star apple was the favorite fruit of King Christophe and he held court under the shade of a very large specimen at Milot. The United States Department of Agriculture received seeds from Jamaica in 1904 (S.P.I. #17093). The star apple is grown occasionally in southern Florida and in Hawaii where it was introduced before 1901. There are some trees in Samoa and in Malaya though they do not bear regularly. The tree is grown in southern Vietnam and in Kampuchea for its fruits but more for its ornamental value in West Tropical Africa, Zanzibar, and the warmer parts of India. It was introduced into Ceylon in 1802, reached the Philippines much later but has become very common there as a roadside tree and the fruit is appreciated. Varieties Apart from the two distinct color types, there is little evidence of such pronounced variation that growers would be stimulated to make vigorous efforts to select and propagate superior clones. William Whitman of Miami observed a tree yielding heavy crops of well-formed, high quality fruits in Port-au-Prince, Haiti, from late January to the end of June. He brought budwood to Florida in 1953. Grafted progeny and trees grown from air-layers have borne well here even prior to reaching 10 ft (3 m) in height. This introduction, named the "Haitian Star Apple", is propagated commercially for dooryard culture. Climate The star apple tree is a tropical or near-tropical species ranging only up to 1,400 ft (425 m) elevation in Jamaica. It does well only in the warmest locations of southern Florida and on the Florida Keys. Mature trees are seriously injured by temperatures below 28º F (-2.22º C) and recover slowly. Young trees may be killed by even short exposure to 31º F (-0.56º C). Soil The tree is not particular as to soil, growing well in deep, rich earth, clayey loam, sand, or limestone, but it needs perfect drainage. Propagation Star apple trees are most widely grown from seeds which retain viability for several months and germinate readily. The seedlings bear in 5 to 10 years. Vegetative propagation hastens production and should be more commonly practiced. Cuttings of mature wood root well. Air-layers can be produced in 4 to 7 months and bear early. Budded or grafted trees have been known to fruit one year after being set in the ground. In India, the star apple is sometimes inarched on star apple seedlings. Grafting on the related satinleaf tree (C. oliviforme L.) has had the effect of slowing and stunting the growth. Culture During the first 6 months, the young trees should be watered weekly. Later irrigation may be infrequent except during the flowering season when watering will increase fruit-set. Most star apple trees in tropical America and the West Indies are never fertilized but a complete, well-balanced fertilizer will greatly improve performance in limestone and other infertile soils. Harvesting Star apples are generally in season from late winter or early spring to early summer. They do not fall when ripe but must be hand-picked by clipping the stem. Care must be taken to make sure that they are fully mature. Otherwise the fruits will be gummy, astringent and inedible. When fully ripe, the skin is dull, a trifle wrinkled, and the fruit is slightly soft to the touch. Yield In India, a mature star apple tree may bear 150 lbs (60 kg) of fruits in the short fruiting season of February and March. Keeping Quality Ripe fruits remain in good condition for 3 weeks at 37.4º to 42.8º F (3º-6º C) and 90% relative humidity. Pests and Diseases Larvae of small insects are sometimes found in the ripe fruits. The, main disease problem in the Philippines is stem-end decay caused by species of Pestalotia and Diplodia. In Florida, some fruits may mummify before they are full-grown. The foliage is subject to leaf spots from attack by Phomopsis sp., Phyllosticta sp., and Cephaleuros virescens, the latter known as algal leaf spot or green scurf. Birds and squirrels attack the fruits if they are left to fully ripen on the tree. Food Uses Star apples must not be bitten into. The skin and rind (constituting approximately 33% of the total) are inedible. When opening a star apple, one should not allow any of the bitter latex of the skin to contact the edible flesh. The ripe fruit, preferably chilled, may be merely cut in half and the flesh spooned out, leaving the seed cells and core. A combination of the chopped flesh with that of mango, citrus, pineapple, other fruits and coconut water is frozen and served as Jamaica Fruit Salad Ice. An attractive way to serve the fruit is to cut around the middle completely through the rind and then, holding the fruit stem-end down, twisting the top gently back and forth. As this is done, the flesh will be felt to free itself from the downward half of the rind, and the latter will pull away, taking with it the greater part of the core. In Jamaica, the flesh is often eaten with sour orange juice, a combination called "matrimony"; or it is mixed with orange juice, a little sugar, grated nutmeg and a spoonful of sherry and eaten as dessert called "strawberries and-cream". Bolivians parboil the edible portion, and also prepare it as a decoction. An emulsion of the slightly bitter seed kernels is used to make imitation milk-of almonds, also nougats and other confections. Food Value Per 100 g of Edible Portion (Flesh)* Calories 67.2 Moisture 78.4-85.7 g Protein 0.72-2.33 g Carbohydrates 14.65 g Fiber 0.55-3.30 g Ash 0.35-0.72 g Calcium 7.4-17.3 mg Phosphorus 15.9-22.0 mg Iron 0.30-0.68 mg Carotene 0.004-0.039 mg Thiamine 0.018-0.08 mg Riboflavin 0.013-0.04 mg Niacin 0.935-1.340 mg Ascorbic Acid 3.0-15.2 mg Amino Acids: Tryptophan 4 mg Methionine 2 mg Lysine 22 mg *Analyses made in Cuba and Central America. Toxicity The seeds contain 1.2% of the bitter, cyanogenic glycoside, lucumin; 0.0037% pouterin; 6.6% of a fixed oil; 0.19% saponin; 2.4% dextrose and 3.75% ash. The leaves possess an alkaloid, also resin, resinic acid, and a bitter substance. Other Uses Wood: The tree is seldom felled for timber unless there is a particular need for it. The heartwood is pinkish or red-brown, violet, or dark-purple; fine-grained, compact, heavy, hard, strong, tough but not difficult to work; durable indoors but not outside in humid conditions. It has been utilized for heavy construction and for deluxe furniture, cabinetwork and balustrades. Latex: The latex obtained by making incisions in the bark coagulates readily and has been utilized as an adulterant of gutta percha. It was formerly proposed as a substitute for wax on the shelves of wardrobes and closets. Medicinal_Uses The ripe fruit, because of its mucilaginous character, is eaten to sooth inflammation in laryngitis and pneumonia. It is given as a treatment for diabetes mellitus, and as a decoction is gargled to relieve angina. In Venezuela, the slightly unripe fruits are eaten to overcome intestinal disturbances. In excess, they cause constipation. A decoction of the rind, or of the leaves, is taken as a pectoral. A decoction of the tannin-rich, astringent bark is drunk as a tonic and stimulant, and is taken to halt diarrhea, dysentery and hemorrhages, and as a treatment for gonorrhea and "catarrh of the bladder". The bitter, pulverized seed is taken as a tonic, diuretic and febrifuge. Cuban residents in Miami are known to seek the leaves in order to administer the decoction as a cancer remedy. Many high-tannin plant materials are believed by Latin Americans to be carcinostatic. In Brazil, the latex of the tree is applied on abscesses and, when dried and powdered, is given as a potent vermifuge. Else where, it is taken as a diuretic, febrifuge and remedy for dysentery.
- Brand
- Need this Tool Customized?
Brand
LMT
Need This Tool Customized?
Every machining application is different. If this tool is close to what you need but not an exact fit, General Cutting Tools can help modify it for your specific job, machine, material, or production requirement.
We work with CNC shops, industrial manufacturers, tool rooms, and production facilities to provide tool modifications that improve fit, function, performance, and efficiency. Whether you need a small adjustment or a more specialized cutting tool solution, our team can review your requirements and recommend the best option.
Custom tool modifications can help reduce setup time, improve accuracy, extend tool life, solve clearance issues, and support more consistent production results.
Common Tool Customization Options
Diameter and OD Modifications
We can modify tool diameters to better match your application requirements, including cutting diameter changes, OD modifications, pilot diameter adjustments, step diameters, and shank diameter modifications.
Bore Modifications for Saw Blades
Custom saw blade bore modifications are available for hole diameter changes, pinholes, mounting holes, and keyway cutouts to help match your machine setup and cutting requirements.
Length Adjustments
Tools can be modified for specific reach, clearance, or setup needs. This may include overall length changes, flute length adjustments, reduced neck sections, extended reach designs, or shortened tools for improved rigidity.
Shank Modifications
Shank modifications can help ensure the tool fits properly in your holder, spindle, or machine setup. Common options include shank diameter changes, flats, Weldon flats, reduced shanks, and custom holding requirements.
Radius, Chamfer, and Corner Changes
We can customize corner radius, chamfer angles, edge breaks, and other profile details to meet part print requirements or improve cutting performance.
Step Tool Modifications
For applications that require multiple diameters or operations in a single tool, we can create or modify step tools to help reduce tool changes and improve production efficiency.
Flute and Cutting Edge Adjustments
Depending on the tool and application, flute length, cutting edge geometry, end cutting features, relief angles, and cutting edge shape may be modified to improve chip evacuation, cutting action, and tool performance.
Regrinding and Resharpening
Many cutting tools can be reground or resharpened to restore performance, extend tool life, and reduce replacement costs.
Custom Profiles and Special Forms
For unique part features, we can help provide special forms, custom profiles, custom radii, counterbores, countersinks, keyseat cutters, form tools, and other application-specific tooling solutions.
Material-Specific Tool Adjustments
We can help modify or recommend tooling based on the material being machined, including aluminum, brass, bronze, plastics, stainless steel, hardened steel, cast iron, composites, and other industrial materials.
Have a Drawing, Sample, or Part Print?
Send us your print, sketch, CAD file, photo, tool number, sample, or application details. For the fastest quote, include the material being cut, quantity needed, required dimensions, tolerances, and any machine or holder requirements.
Coating Options
Tool coatings can be selected or added to improve wear resistance, heat resistance, lubricity, and performance in specific materials such as steel, stainless steel, aluminum, cast iron, and high-temperature alloys.
Request a Custom Tool Modification
Need this tool changed for your application? Contact General Cutting Tools today to discuss your custom tooling needs. We can help you find the right solution for your machine, material, and production goals.
Related products
Adjustable Milling System
$ 7.10
Adjustable Milling System
$ 8.61
Adjustable Milling System
$ 8.42
Adjustable Milling System
$ 4.04
Adjustable Milling System
$ 5.68
Adjustable Milling System
$ 5.68
Adjustable Milling System
$ 3.14
Adjustable Milling System
$ 4.10